Coleman Audio QS8 passive control room monitor master module with talkback mic

Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic
Coleman Audio QS8 passive control room monitor master module with talkback mic

Coleman Audio QS8 passive control room monitor master module with talkback mic

Great monitor controller with cue mix and talkback mic. Used in smoke free studio environment. A/B between 2 balanced stereo sources, Aux #1 and Aux #2 with a stepped attenuator for level control feeding the output to the main or alternate speakers. The main signal path is completely passive, no electronics in the signal path means no noise added or coloration of the audio signal.

There is also a Mix selection on the control room switch when using the QS8 as an analogue summing box. This selection does have electronics in the path since you are listening to the sum of 4 stereo inputs. Cue Mixing Section (no latency) The cue mix is the sum of the stereo cue input and Aux #3 stereo input. The stereo cue can select between a dedicated stereo cue input from the back panel or the control room signal (Aux #1 or Aux #2).

This stereo cue has its own input level control. The Aux #3 input sums with the stereo cue signal, has a L/R or mono select button and an input level control. The resulting stereo cue mix has an overall master level control and is sent out to the headphone amp.

Example: If you are doing a vocal overdub and you can split the vocal mic pre amp output signal with a Y cord sending one side to the DAW to record and the other side to the Aux #3 input on the QS8. This eliminates any latency issue because the artist will hear the input. The stereo/mono select button allows the vocal to be on both sides of the headphone and input level control for Aux #3 allows for more me in the headphones for the vocalist. So if the artist cant hear enough of themselves you can just reach over and turn them up without digging into the DAW. Communication SectionThe talkback switch activates the talkback mic and dims the control room signal.

There is a talkback level control so you can the talkback level to the headphones and a slate output on the back panel that can be used to slate the track (take 1, take 2, take 23). The omnidirectional talkback microphone is included with the QS8 and has a 12 foot cable. You can also remote the talkback switch from the TB remote jack on the back panel. Any momentary switch will work. Engineers Headphone SectionThe headphone output on the front panel is designated for the recording engineer but could be used for a player in the control room too.

You can select between 2 sources. The cue mix being sent to the artist, this includes the talkback signal too. Or the Mix which is the summing section of the QS8. QS8 as an Analogue Summing BoxPressing the Mix button on the control room selector turns the QS8 into a analogue summing box. There are 4 stereo sources or stems that are summed together (Aux #1 and Aux #2, the stereo cue input from the back panel and stereo Aux #3 on the back panel).

The Aux #1 and Aux #2 levels are controlled in the DAW but the stereo cue and Aux#3 input level control can adjust the level in the analogue mix. Aux#3 stereo/mono switch is also present in the mix so a bass and kick drum can be brought into Aux #3 L and R and made mono in the resulting stereo mix. The analogue mix comes out on a pair of XLR connectors on the back and can be looped back to the DAW to record the mix track.

But wait theres moreSometimes you need a second stereo cue. The QS8 can do this. The engineer is listening to the Aux #1 input signal on the control room monitors so that signal is not feeding the mix output XLRs but the Aux #2, Aux #3 and the stereo cue are still feeding the mix output XLRs.

The QS8 has the features of the mix and control room section of a recording console but only takes up 1 rack space. The item "Coleman Audio QS8 passive control room monitor master module with talkback mic" is in sale since Saturday, August 8, 2020. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Signal Processors/Rack Effects". The seller is "herschel27" and is located in Los Angeles, California. This item can be shipped to United States.


Coleman Audio QS8 passive control room monitor master module with talkback mic


Index    Sitemap    Contact Form    Privacy Policy Agreement    Terms of service